TRAINING MANUAL
FLIGHT ACADEMY DOCUMENTATION ID: PRB-TM-001
STEP 1: THE BUILDER 🏗️
Drag components from the side panel onto the grid. Every rocket must start with a Command Pod or Satellite.
- Snap-to-Grid: Parts align automatically for structural integrity.
- Connectivity: Fuel tanks must be connected to engines via support or directly.
- Aerodynamics: Add nose cones to reduce drag at high velocities.
STEP 2: PRE-LAUNCH CHECK 📋
Before ignition, review the Pre-Launch Analysis in the stats bar:
- TWR < 1.0: Rocket is too heavy to lift off.
- Delta-V: Total velocity change capability of your rocket.
- Max Q Risk: High dynamic pressure might snap your rocket!
STEP 3: FLIGHT CONTROL 🚀
Monitor your telemetry carefully during ascent:
- Throttle: Manage fuel and G-forces using the slider.
- Staging: Drop empty tanks to save weight.
- Heat: Watch for re-entry heating as the TEMP gauge turns red.
